Operation Manual

Page
2 - 14 2.5.3 When EEPROM setting is required
2 - 14 2.5.4 When the carriage belt tension needs adjustment
2 - 15 2.5.5 When the ASF gear initial position adjustment is required
2 - 16 2.5.6 When the head gap needs adjustment
2 - 18 3. VERIFYING OPERATIONS AFTER DISASSEMBLY/REASSEMBLY
2 - 18 3.1 Methods
2 - 19 4. TRANSPORTING THE PRINTER
2 - 19 4.1 Preparation for Transportation
Part 3: Operation
3 - 1 1. FUNCTIONS RELATED TO PRINTER OPERATION
3 - 1 1.1 Status Indications
3 - 2 1.1.1 Status indications by the LED
3 - 3 1.1.2 Details of error conditions
3 - 4 1.1.3 BJ status monitor
3 - 5 1.2 Operations from the Computer
3 - 5 1.2.1 Function settings using the printer driver
3 - 6 1.3 Operations from the Printer
3 - 6 1.3.1 Cleaning
3 - 6 1.3.2 Nozzle check pattern print
3 - 6 1.3.3 Roller cleaning
3 - 8 2. SERVICE FUNCTIONS
3 - 8 2.1 Service Mode Operations
3 - 9 2.2 Service/Factory Test Print
3 - 10 2.3 EEPROM Information Print
3 - 11 2.4 Resetting the EEPROM
3 - 11 2.5 Model Settings with EEPROM
3 - 11 2.6 Ink Presence Check
3 - 11 2.7 Power Off/Carriage Lock
Part 4: Troubleshooting
4 - 1 1. TROUBLESHOOTING BY ERROR INDICATIONS
4 - 1 1.1 Initial Flow Chart
4 - 4 1.2 List of Errors (Indicator/error codes)
4 - 5 1.3 Troubleshooting by Error Indications
4 - 17 2. TROUBLESHOOTING BY SYMPTOMS
4 - 17 2.1 Troubleshooting by Symptoms
III