Operation Manual

297Troubleshooting
Problems and Solutions
■ BJ cartridge does not return to the home position after installation
After replacing the BJ cartridge or a BJ tank, the cartridge holder does not return to the
home position. When the CARTRIDGE button is pressed, the printer beeps but the POWER
light remains flashing.
Make sure the BJ cartridge is installed correctly
Turn the printer off, wait a few seconds, turn it back on, and then re-install the BJ cartridge.
Changing or Replacing a BJ Cartridge
If the BJ cartridge and holder do not return to the home position, then remove the
BJ cartridge and install another BJ cartridge.
Home position is on the left
BJC-55.book Page 297 Tuesday, August 15, 2000 2:08 AM