Operation Manual

314Troubleshooting
Problems and Solutions
Determine if the top margin value in the software application is too large
Reduce the top margin value to the minimum allowed by the software application. If this is
not possible, then reduce the number of lines allowed per printed page. Refer to your
software application documentation for details.
■ Printer does not turn on
The POWER light does not come on when you press the POWER button.
Check the printer and power cable
• Make sure that the lock switch is set to the right.
• Press the POWER button again to see if the POWER light comes on.
• If the power outlet is overloaded, then the printer will automatically turn off. If this
occurs, unplug the printer and wait a few moments and plug it in again.
• Plug other electrical appliances into the same power outlet to see if it is working.
• Connect the power cord to the printer and plug in the power cord to the power
outlet securely.
BJC-55.book Page 314 Tuesday, August 15, 2000 2:08 AM