Operation Manual

64Maintaining the Printer
Using the Low-Ink Alert
■ Resetting the Low-Ink Alert After Replacing a BJ Tank
You can reset the low-ink alert manually with the printer’s operation panel. After replacing
the BJ tank, press and hold down the RESUME button for the required number of beeps,
depending on which BJ tanks you replaced.
Also, after a low-ink alert occurs, you can replace the BJ tank from the Maintenance tab of
the printer driver and reset the low-ink alert.
Printing With Windows 98 or Windows CE
Printing With Windows 2000
Printing With Macintosh
Turning Off the Low-Ink Alert
Press POWER to turn off the printer.
Press and hold down the POWER button until the printer beeps 7 times.
Replaced BJ Tank Press & Hold Until you hear
Black RESUME 1 beep
Color RESUME 2 beeps
Black and Color RESUME 3 beeps
Cancel selection RESUME 4 beeps
1
2
BJC-55.book Page 64 Tuesday, August 15, 2000 2:08 AM