Operation Manual

2) Insert the measuring sheet into the manual paper feed slot. With the platen held
down in position, align the left of the measuring sheet with the paper guides on
the printer. Then, insert the measuring sheet until its leading edge is hooked on
the spurs (see figure below) taking care not to deform the spurs.
3) Gently press down on both ends of the platen, and then quickly release your
hands. Repeat this two or three times to stabilize the platen position. Be sure to
carry out this step. Otherwise, the head gap cannot be measured correctly.
5-9
BJC-7100
Part 5: Maintenance
Measuring Sheet
Push here
Figure 5-10 Measuring Sheet Setting 1
Push down gently Release quickly
Figure 5-11 Measuring Sheet Setting 2