Operation Manual

<Cause> 1. No ink in BJ cartridge BC-60.
2. No ink in color BJ cartridge BC-61.
3. No ink in Photo BJ cartridge BC-62e Photo.
<Suspected parts> BJ cartridge, ink tank, antenna,
carriage unit, logic board, front cover,
main cover
<Measure> 1. BJ cartridge BC-60
Part 5: Maintenance
BJC-7100
5-26
14. Ink-out Error
Beeper: 3 times (BJ cartridge BC-60)
Beeper: 4 times (Color BJ cartridge
BC-61 or Photo BJ
cartridge BC-62e Photo)
ERROR indicator: ON
POWER indicator: Blinks
Replace BJ cartridge
BC-60.
Does error recur?
Repeat head cleaning and
deep cleaning operations
4 or 5 times.
Repeat cleaning.
Check purging by
purge unit.
1.Check or replace
carriage cable.
Does error recur?
OK?
Replace purge unit.
No
Yes
Yes
No
Yes
No
• Visually check purge unit purge operation during cleaning to
check that ink is purged.
END
Align print heads.
OK?
No
Yes
Use under specified
ambient conditions.
Check ambient conditions.
2.Replace carriage unit.
3.Replace logic board.
• Is there anything that might generate noise nearby?
• Measure the resistance of the contact between shield plates of
front and main covers.
• Use normal print driver.