Operation Manual

3.8 Service Mode
Use the control buttons to select printer service mode.
In Service Mode, you can, in addition to resetting the EEPROM data, execute the
functions shown in Table 3-4.
1) While holding down the RESUME button, press the POWER button to turn on the
printer.
2) Holding down the POWER button, press the RESUME button twice before the printer
completes its initialization sequence (while the POWER indicator is blinking).
3) On completion of the initialization sequence, press the RESUME button the number
of times required to select the desired function.
4) Press the POWER button to execute the selected function.
3-21
BJC-7100
Part 3: Operating Instructions
Function
Quit Service Mode
Print Final Factory
Test Pattern.
Reset EEPROM All
Service Data.
Reset EEPROM Waste
Ink Amount Data.
Print EEPROM Data.
Change Country of
Destination.
Print Durability
Pattern for plain
paper.
Print Durability
Pattern for glossy
photo paper.
Print LF Check
Pattern.
Quit Service Mode
RESUME
Button Count
none
Once
Twice
3 times
4 times
5 times
6 times
7 times
8 times
9 times or
more
ERROR
Indicator
OFF
ON
OFF
ON
OFF
ON
OFF
ON
ON
OFF
Reference
Page
—
3-22
3-22
3-22
3-23
3-23
3-24
3-24
3-24
—
Remarks
Prints continuous A4-wide pattern.
Stops printing when you turn off
the power.
Power is automatically turned off
on completion.
Power is automatically turned off
on completion.
Power is automatically turned off
on completion.
See section 3.8.4.
Prints continuous A4-wide pattern.
Stops printing when you turn off
the power.
Power is automatically turned off
on completion.
Prints continuous A4-wide pattern.
Stops printing when you turn off
the power.
Restores normal mode.
Use when cancelled.
TABLE 3-4 SERVICE MODE