Specifications

Command Descriptions
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2-75
<x> specifies which graticule cursor , where x = 1 for the reference cursor and
x = 2 for the delta cursor
<NR3> is the Y cursor position value.
CURSOR:GRATICULE:YPOSITION1?
might return CURSor:GRAticule:YPOSITION1 2.04E0
CURSor:HBArs? (Query Only)
Returns the current settings for the horizontal bar cursors.
Cursor
CURSor:HBArs?
CURSOR:HBARS?
might return :CURSOR:HBARS:POSITION1 0.0E0;POSITION2 0.0E0;DELTA
0.0E0;SELECT CURSOR1;UNITS ”V”.
CURSor:HBArs:DELTa? (Query Only)
Returns the vertical difference between the two horizontal bar cursors.
Cursor
CURSor:HBArs:DELTa?
<NR3> indicates the vertical difference between the two H Bar cursors.
CURSOR:HBARS:DELTA?
might return :CURSOR:HBARS:DELTA 5.08E0 for the difference between the two
cursors.
CURSor:HBArs:UNIts?
Arguments
Examples
Group
Syntax
Examples
Group
Syntax
Returns
Examples
Related Commands