Specifications

Command Descriptions
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2-83
CURSor:WAVEform:SELect
Selects (makes active) or returns the specified XY display waveform cursor. This
command is equivalent to pressing the SELECT button on the front panel when
the XY Waveform cursors are active. Use the CURSor:VBArs commands to
position the XY waveform cursors.
Cursor
CURSor:WAVEform:SELect { CURSOR1 | CURSOR2 }
CURSor:WAVEform:SELect?
CURSOR1 sets the XY waveform reference cursor as the active cursor.
CURSOR2 sets the XY waveform delta cursor as the active cursor.
CURSOR:WAVEFORM:SELECT CURSOR2
selects the XY waveform delta cursor as the active cursor.
CURSor:XY:PRODDelta? (Query Only)
(Available with TDS3AAM)
Returns the value of the XY cursor product delta readout. XY display mode, XY
cursors, and Product readout must be enabled prior to executing this command.
Cursor
CURSor:XY:PRODDelta?
CURSor:XY:PRODDelta?
might return CURSor:XY:PRODDelta 2.164E1
CURSor:XY:PRODUCT<x>, CURSor:XY:READOUT, D ISplay:XY:MODe
Group
Syntax
Arguments
Examples
Group
Syntax
Examples
Related Commands