Specifications

Command Descriptions
2-92
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
DATa
Sets or returns the format and location of the waveform data that is transferred
with the CURVe command. Since DATa:DESTination and DATa:TARget are
equivalent, only DATa:DESTination is returned by the DATa? query.
Waveform
DATa { INIT }
DATa?
INIT initializes the waveform data parameters to their factory defaults.
DATA?
might return the string :DATA:ENCDG RPBINARY;DESTINATION REF4; SOURCE
REF4;START 1;STOP 500;WIDTH 2
CURVE, WAVFrm?
DATa:DESTination
Sets or returns the reference memory location for storing waveform data that is
transferred into the oscilloscope by the CURVe command. This command is
identical to the DAT a:TARget command.
Waveform
DATa:DESTination REF<x>
DATa:DESTination?
REF<x> (REF1, REF2, REF3 or REF4) is the reference memory location where the
waveform will be stored.
This means that you cannot have a channel or math waveform as a destination.
Group
Syntax
Arguments
Examples
Related Commands
Group
Syntax
Arguments