Specifications

Command Descriptions
2-94
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
SRPbinary is the same as RPBinary except that the byte order is swapped,
meaning that the least significant byte is transferred first. This format is useful
when transferring data to IBM compatible PCs.
Table 2- 33: DATa and WFMPre parameter settings
WFMPre settings
DATa:ENCdg Setting
:ENCdg
:BN_Fmt :BYT_Or
ASCIi ASC
N/A N/A
RIBinary BIN RI MSB
RPBinary BIN RP MSB
SRIbinary BIN RI LSB
SRIbinary BIN RP LSB
DATA:ENCDG RPBINARY
sets the data encoding format to be positive integer where the most significant
byte is transferred first.
DATA:ENCDG?
might return SRPBINARY for the format of the waveform data.
WFMPre:BN_Fmt, WFMPre:BYT_Or, WFMPre:ENCdg
DATa:SOUrce
Sets or returns the location of the waveform data that is transferred from the
instrument by the CURVe? query. You can transfer one waveform at a time.
Waveform
DATa:SOUrce <wfm>
DATa:SOUrce?
<wfm> is the location of the waveform data that will be transferred from the
oscilloscope to the controller. Valid values are CH1, CH2, CH3, CH4, MATH,
MATH1 (same as MATH), REF1, REF2, REF3, and REF4.
Examples
Related Commands
Group
Syntax
Arguments