Specifications

Command Descriptions
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2- 101
DIAg:RESUlt:FLAg? (Query Only)
Returns the pass/fail status from the last diagnostic test sequence execution. The
DIAg:RESUlt:LOG? query can be used to determine which test(s) has failed.
Calibration and Diagnostic
DIAg:RESUlt:FLAg?
PASS indicating that all of the selected diagnostic tests have passed.
FAIl indicating that at least one of the selected diagnostic tests has failed.
DIAG:RESULT:FLAG?
returns either :DIAG:RESULT:FLAG PASS or FAIl.
DIAg:RESUlt:LOG?
DIAg:RESUlt:LOG? (Query Only)
Returns the internal results log from the last diagnostic test sequence execution.
The list contains all modules and module interfaces that were tested along with
the pass/fail status of each.
Calibration and Diagnostic
DIAg:RESUlt:LOG?
<QString> in the following format:
<Status>--<Module name>[,<Status>--<Module name>...]
DIAG:RESULT:LOG?
might return :DIAG:RESULT:LOG ”pass--CPU,pass--Display,pass--Front
Panel,pass--IO,pass--Acquisition,pass--FDD,pass--Application Key,
pass--ROM”.
DIAg:RESUlt:FLAg?
Group
Syntax
Returns
Examples
Related Commands
Group
Syntax
Returns
Examples
Related Commands