Specifications

Command Descriptions
2- 106
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
DISplay:INTENSITy:BACKLight
Sets or returns the backlight intensity for the display. This is equivalent to setting
Backlight Intensity in the DISPLAY menu.
Display
DISplay:INTENSITy:BACKLight { HIGH | MEDium | LOW }
DISplay:INTENSITy:BACKLight?
DISPLAY:INTENSITY:BACKLIGHT?
might return :DISPLAY:INTENSITY:BACKLIGHT HIGH
DISplay:INTENSITy:WAVEform
Sets the intensity of the waveforms. This command is equivalent to adjusting the
WAVEFORM INTENSITY knob.
Display
DISplay:INTENSITy:WAVEform <NR1>
DISplay:INTENSITy:WAVEform?
<NR1> is the waveform intensity and ranges from 1 to 100 percent.
DISPLAY:INTENSITY:WAVEFORM?
might return :DISPLAY:INTENSITY:WAVEFORM 60 as the intensity of the
waveforms.
DISplay:PERSistence
Sets the length of time that data points are displayed. This command is equiva-
lent to changing Persist Time in the Waveform Display menu.
Display
Group
Syntax
Examples
Group
Syntax
Arguments
Examples
Group