Specifications

Command Descriptions
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2- 111
ON or NR1 ≥ 1 enables the vectorscope display mode.
OFF or NR1 ≤ 0 disables the vectorscope display mode.
DISPLAY:VECTORSCOPE:STATE?
might return :DISPLAY:VECTORSCOPE:STATE 0 indicating that the vectorscope
display mode is disabled (off).
DISplay:VECtorscope:TY_SETTING
(Requires TDS3VID or TDS3SDI)
Sets or returns the video vectorscope display type setting state. Note that this
does not actually turn on the vectorscope display type, but just sets the type
value.
Display
DISplay:VECtorscope:TY_SETTING { ONEHundred | SEVENTYFive |
<NR1> }
DISplay:VECtorscope:TY_SETTING?
ONEHundred or NR1 ≥ 1 sets the vectorscope display mode to 100%.
SEVENTYFive or NR1 ≤ 0 sets the vectorscope display mode to 75%.
DISPLAY:VECTORSCOPE:TY_SETTING?
might return :DISPLAY:VECTORSCOPE:TY_SETTING 1 indicating that the
vectorscope display mode is set to 100%.
DISplay:VECtorscope:TYPE
(Requires TDS3VID or TDS3SDI)
Sets or returns the video vectorscope display type setting.
Display
DISplay:VECtorscope:TYPE { ONEHundred | SEVENTYFive | <NR1> }
DISplay:VECtorscope:TYPE?
Arguments
Examples
Group
Syntax
Arguments
Examples
Group
Syntax