Specifications

Command Descriptions
2-112
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
ONEHundred or NR1 ≥ 1 sets the vectorscope display mode to 100% colorbars.
SEVENTYFive or NR1 ≤ 0 sets the vectorscope display mode to 75% colorbars.
DISPLAY:VECTORSCOPE:TYPE?
might return :DISPLAY:VECTORSCOPE:TYPE 1 indicating that the vectorscope
display mode is set to 100%.
Display:XY? (Query Only)
Returns all XY and Gated XYZ parameters.
Display
DISplay:XY?
DISPLAY:XY?
might return :DISPLAY:XY:MODE OFF;YCHANNEL OFF;YREF REF2;ZCHANNEL
OFF;ZLEVEL 0.0 indicating the XY display is off.
DISplay:XY:MODe, DISplay:XY:YCHannel
DISplay:XY:MODe
Sets or returns the display mode. This command is equivalent to setting
XY Display in the DISPLAY menu.
Display
DISplay:XY:MODe { OFF | TRIGger | GATEdxyz | VECtorscope }
DISplay:XY:MODe?
OFF sets the display to a voltage versus time format and is the normal mode.
TRIGger displays the voltage of one waveform against the voltage of another.
The sources that make up an XY waveform are predefined and are listed in
Table 2--35. Displaying one source causes its corresponding source to be
displayed.
Arguments
Examples
Group
Syntax
Examples
Related Commands
Group
Syntax
Arguments