Specifications

Command Descriptions
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2- 121
the server name or server IP address is required. If you do not use all three fields,
the missing field delimiter must still be used.
NOTE. If DNS services are not available, all these fields must be filled in.
Adding a printer that already exists in the list is equivalent to doing a rename
printer operation; the new settings replace the existing printer settings.
ETHERNET:NETPRINTER:ADD ”QMSprt;prtserva1;128.121.33.21”
adds a printer to the oscilloscope printer list.
ETHERNET:NETPRINTER:ADD ”HP600dpi;HPserver;”
adds a printer to the oscilloscope printer list. Note that only the network printer
name and print server name are entered, and that the required IP address
delimiter is at the end of the string. This example assumes that DNS services are
available to supply the printer server IP address.
ETHERnet:NETPRInter:DELEte (Set Only)
(TDS3000B Series, TDS3000C Series, and TDS3EM Only)
Deletes the specified printer from the oscilloscope network printer list.
Ethernet
ETHERnet:NETPRInter:DELEte <QString>
<QString> is a quoted composite string that contains, in the following order, the
network printer name, printer server name, and print server IP address. Each field
is delimited by a semicolon (;). The printer name is required, and either the
server name or server IP address is required. If you do not use all three fields,
you must still use the missing field delimiters.
ETHERNET:NETPRINTER:DELETE ”QMSprt;prtserva1;128.121.33.21”
deletes the specified printer from the oscilloscope network printer list
Examples
Group
Syntax
Arguments
Examples