Specifications

Command Descriptions
2- 142
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
HARDCopy:PORT
Sets or returns where to send the hard copy data on the next hard copy command
(i.e. HARDCOPY START command). This is equivalent to setting Port in the
UTILITY > Hard Copy menu.
Hard copy
HARDCopy
HARDCopy:PORT { CENtronics | FILE | GPIb | RS232 | ETHERnet }
HARDCopy:PORT?
CENtronics specifies that the hard copy is sent out the Centronics port.
(TDS3000 Series and TDS3000B Series only.)
FILE specifies that the hard copy is stored in the file named in the
HARDCOPY:FILENAME command.
GPIb specifies that the hard copy is sent out the GPIB port (available with
optional TDS3GM and TDS3GV communication modules).
RS232 specifies that the hard copy is sent out the RS232 port (available on
optional TDS3VM, TDS3GM, TDS3EM and TDS3GV communication
modules).
ETHERnet specifies that the hard copy is sent out the 10baseT Ethernet port.
(TDS3000 series requires TDS3EM module.)
HARDCOPY:PORT?
might return :HARDCOPY:PORT GPIB as the selected hard copy output port.
HARDCopy:PREVIEW
Changes the display screen to simulate hard copy output. The result depends on
the current Format, Layout, Palette, and Inksaver selections. It may be mono-
chrome (black and white), grayscale, limited color, or full color.
Hard copy:
Group
Related Commands
Syntax
Arguments
Examples
Group