Specifications

Command Descriptions
2- 162
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
LIMit:TEMPLate:TOLerance:VERTical
(Requires TDS3LIM)
Sets or returns the amount, in units of vertical divisions, by which the source
waveform is varied vertically when creating the destination waveform.
Limit Test
LIMit:TEMPLate:TOLerance:VERTical <NR3>
LIMit:TEMPLate:TOLerance:VERTical?
<NR3> is the amount, in vertical divisions, by which the source waveform is
varied vertically when creating the test waveform. The range is 0 to 5 divisions.
LIMIT:TEMPLATE:TOLERANCE:VERTICAL 1.0
specifies that the source waveform is vertically varied by ±1.0 vertical division
when creating this test waveform.
LIMIT:TEMPLATE:TOLERANCE:VERTICAL?
might return 1.0, specifying that the source waveform is vertically varied by
±1.0 vertical division when creating this test waveform.
LIMit:COMPA RE:CH<x>
Group
Syntax
Arguments
Examples
Related Commands