Specifications

Command Descriptions
2- 172
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
MASK:DISplay
(Requires TDS3TMT)
Sets or returns the mask violation detection and display status. Enabling
detection and display causes waveform points which violate the mask to be
displayed in an intensified color so that mask violation points are clearly visible
on the display. MASK:DISplay is set to ON if MASK:TESt:STATE,
MASK:COUNt:STATE, or MASK:S TOPOnviolation are set to ON.
Mask
MASK:DISplay { OFF | ON | <NR1> }
MASK:DISplay?
OFF turns off mask violation detection and display.
ON turns on mask violation detection and display.
<NR1> is an integer number where NR1 = 0 turns off mask violation detection
and display, and NR1 ≠ 0 turns on mask violation detection and display.
MASK:COUNT:WAVEFORMS ON
sets the oscilloscope to detect and highlight mask violations.
MASK:LOCk
(Requires TDS3TMT)
Sets or returns the mask lock to waveform mode. Mask lock locks the mask to
the waveform such that changes to the horizontal and/or vertical scale settings
redraws the mask segments in proportion. This feature allows for expanding
horizontal and/or vertical settings to zoom in on waveforms and masks to
visually examine violation areas in more detail. You can only use Mask Lock on
stopped acquisitions or when pass/fail testing is not running.
Mask
MASK:LOCk { OFF | ON | <NR1> }
MASK:LOCk?
Group
Syntax
Arguments
Examples
Group
Syntax