Specifications

Getting Started
1-12
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
Table 1- 2: Ethernet Network Settings side menu (Cont.)
Side DescriptionField/value
Debug On Off Helps in debugging network communications
problems by displaying the last 30 characters
transmitted and received by the oscilloscope.
Only displays informat ion when receiving and
responding to remote commands or software
such as WaveStar for Oscilloscopes (TDS3000
Series, TDS3000B Series only).
Test Connection Pushing this button tests the oscilloscope
connection to the Ethernet. The oscilloscope
effectiv ely “pings” the network to locate itself.
While testing, the menu displays Testing... .If
the oscilloscope can locate itself on the
network, the menu displays OK.Ifthe
oscilloscope cannot locate itself, the menu
displays No Response.
Table 1--3 describes the Ethernet Printer Settings menu. The procedure on
page 1--15 describes how to enter network printer settings. Note that you do not
need to be connected to the network to add printer setup information.
Table 1- 3: Ethernet Printer Settings side menu
Side Field/value Description
Add Printer Printer Name The name of a printer queue on the desig-
nated print server. Obtain this information from
your network administrator.
Server Name The name of the server running the printer
queue software.
1
Obtain this information from
your network administrator.
Server IP address The IP address of the server running the
printer queue software.
1
Obtain this informa-
tion from your network administrator.
Rename Printer Selected printer in list Lets you edit the selected printer’s setti ngs.
Delete Printer Selected printer in list Deletes the selected printer informati on from
the oscilloscope.
Confirm Delete On Off Enables or disables the oscilloscope from
displaying a confirmation window before
deleting a printer configuration.
1
If you have set the domain name and DNS IP address in the Change Instrument
Settings of the Ethernet Network Settings menu, then all you need to enter is either
the server name or the server IP address. The DNS server will look up the missing
information.