Specifications

Command Descriptions
2- 182
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
OFF disables serial triggering.
ON enables serial triggering.
<NR1> is an integer number where NR1 = 0 turns off serial triggering, and NR1 ≠
0 turns on serial triggering.
MASK:MASKPRE:SERIALTRIG 1
turns on serial triggering for the User mask.
MASK:MASKPRE:PATTERNBITS?, MASK:MASKPRE:PRESAMPBITS
MASK:MASKPRE:TRIGTOSAMP
(Requires TDS3TMT)
Sets or returns the time, in seconds, from the (leading edge) trigger position to
the pulse bit sampling position. The query form of this command returns the
time value of the displayed mask. The set form of this command only affects the
User mask, regardless of the current (displayed) mask.
Mask
MASK:MASKPRE:TRIGTOSAMP <NR3>
MASK:MASKPRE:TRIGTOSAMP?
<NR3> is a floating point number that sets the time to the pulse bit sampling
position.
MASK:MASKPRE:TRIGTOSAMP 162e-9
sets the User mask time from the (leading edge) trigger position to the pulse bit
sampling position to 162 nanoseconds.
MASK:MASKPRE:WIDth
Arguments
Examples
Related Commands
Group
Syntax
Arguments
Examples
Related Commands