Specifications

Getting Started
1-16
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
Figure 1- 10: The Ethernet Printer Settings window
H The Back Space button deletes the character to the left of the cursor
position in the field.
H The Delete button deletes the character at the cursor position in the field.
H The Clear button deletes all characters from the current field.
9. Push the OK Accept side button to apply the field settings. Push the MENU
OFF button to exit from the Add Printer menu without applying any
changes. You do not need to power cycle the oscilloscope to apply printer
settings; you can select and use newly-entered printers immediately.
10. Select a network printer in the Ethernet printer list. You select a printer by
using the general purpose knob to highlight a printer name in the list.
11. Push the MENU OFF button to exit from the System I/O menus.
12. Push UTILITY > System: Hard Copy > Port to verify or set the printer
port to Ethernet.
13. Verify or set the printer format. Verify that the current oscilloscope hard copy
format can print on your network printer.
14. Set Inksaver to ON to print the oscilloscope screen as a black on white
background image.
15. Push the MENU OFF button to exit from the System Hard Copy menu.