Specifications

Command Descriptions
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2- 233
MEASUrement:STATIstics:WEIghting
(Requires TDSAAM)
Controls the responsiveness of mean and standard deviation to waveform
changes.
Measurement
MEASUrement:STATIstics:WEIghting <NR1>
MEASUrement:STATIstics:WEIghting?
<NR1> is the time constant for the mean and standard deviation statistical
accumulations.
MEASUREMENT:STATISTICS:WEIGHTING 4
sets the weighting to 4.
MESSage:BOX
Defines the size and position of the message window. This command does not
display the window unless MESSage:STATE is ON.
Display
MESSage:BOX <X1>,<Y1>,<X2>,<Y2>
MESSage:BOX?
<X1> and <X2> = 0 to 639, and are pixel positions along the horizontal axis. <X1>
defines the left and <X2> defines the right side of the window.
<Y1> and <Y2> = 0 to 479, and are pixel positions along the vertical axis. <Y1>
defines the top and <Y2> defines the bottom of the window. The reserved height
of all characters is 16 pixels so the window must be at least that high to fully
display characters.
Group
Syntax
Arguments
Examples
Group
Syntax
Arguments