Specifications

Command Descriptions
2- 254
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
RS232:HARDFlagging
Sets or returns the input and output hard flagging over the RS-232 port. It uses
the RTS (Request To Send) and CTS (Clear To Send) lines to control data
transmission. On output, the oscilloscope transmits data only when CTS is
asserted. When CTS is not asserted, the oscilloscope stops transmitting data. On
input, it asserts RTS until the receive queue is full. Then it unasserts R TS to stop
transmission from an external printer. CTS remains unasserted until the receive
queue is not full. At that time, CTS is asserted again to restart transmission.
RS232
RS232:HARDFlagging { ON | OFF | <NR1> }
RS232:HARDFlagging?
<ON> or <NR1>
¸ 0 turn on hardflagging.
<OFF> or <NR1> = 0 turn off hardflagging (RTS always asserted).
RS232:HARDFLAGGING ON
turns on hard flagging.
RS232:PRESet (No Query Form)
Sets RS-232 parameters to default values. The RS232? query will show the new
settings
RS232:BAUD 9600
RS232:HARDFLAGGING ON
RS232:TRANSMIT:TERMINATOR LF
Miscellaneous
RS232:PRESet
None.
RS232:PRESET
sets RS232 parameters to the default values.
Group
Syntax
Arguments
Examples
Group
Syntax
Arguments
Examples