Specifications

Command Descriptions
2- 266
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
TRIGGER FORCe
forces a trigger event to occur.
TRIGGER?
might return :TRIGGER:A:MODE AUTO;TYPE EDGE;HOLDOFF:VALUE
2.508E-7;:TRIGGER:A:EDGE:SOURCE CH1;COUPLING DC;SLOPE
RISE;:TRIGGER:A:VIDEO:STANDARD NTSC;SOURCE CH1;FIELD
ALLLINES;:TRIGGER:A:LEVEL 2.6E-1;:TRIGGER:B:STATE 0;BY
TIME;EVENTS:COUNT 1;:TRIGGER:B:TIME 1.32E-8;TYPE EDGE;LEVEL
0.0E0;EDGE:SOURCE CH1;COUPLING DC;SLOPE RISE
TRIGger:A? (Query Only)
Returns the current A trigger parameters.
Trigger
TRIGger:A?
TRIGGER:A?
might return:TRIGGER:A:MODE AUTO;TYPE EDGE;HOLDOFF:TIME
2.508E-7;:TRIGGER:A:EDGE:SOURCE CH1; COUPLING DC;SLOPE
RISE;:TRIGGER:A:VIDEO:STANDARD NTSC;SOURCE CH1;FIELD ALLLINES;
:TRIGGER:A:LEVEL 5.5E1
TRIGger:A:COMMunication:SOUrce
(Requires TDS3TMT)
Sets or returns the current mask standard’s trigger source. The set mode of this
command only applies to the User mask A trigger settings. The query mode of
this command returns the current mask A trigger settings.
Trigger
TRIGger:A:COMMunication:SOUrce { ALTernating | CH<x> | EXT |
EXT10 | LINE | VERTical }
TRIGger:A:COMMunication:Source?
Examples
Group
Syntax
Examples
Group
Syntax