Specifications

Command Descriptions
2- 272
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
TRIGger:A:LOGIc? (Query Only)
Returns the current logic trigger parameters.
Trigger
TRIGger:A:LOGIc?
TRIGGER:A:LOGIC?
might return :TRIGGER:A:LOGIC:INPUT1:SOURCE CH1;LOGICLEVEL
LOW;SLOPE RISE;THRESHOLD 1.4000000000;:TRIGGER:A:LOGIC:CLASS
PATTERN;PATTERN:FUNCTION AND;DELTATIME 0.0000003168;WHEN
TRUE;:TRIGGER:A:LOGIC:STATE:WHEN TRUE
TRIGger:A:LOGIc:CLAss
Sets or returns the logic trigger class value. This command is equivalent to
selecting Class in the Trigger menu when the Type is set to Logic.
Trigger
TRIGger:A:LOGIc:CLAss { PATtern | STATE }
TRIGger:A:LOGIc:CLAss?
PATtern enables pattern triggering, which triggers the oscilloscope when the
logic condition (pattern) on two inputs is met.
STATE enables state triggering, which triggers the oscilloscope when the
specified condition on one channel (state) is met after a second channel (clock)
condition is met.
TRIGGER:A:LOGIC:CLASS?
might return TRIGGER:A:LOGIC:CLASS STATE
TRIGger:A:LOGIc:INPUT<x>:LOGICLevel
Sets or returns the signal logic of the specified logic trigger input.
Trigger
Group
Syntax
Examples
Group
Syntax
Arguments
Examples
Group