Specifications

Command Descriptions
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2- 283
TRIGger:A:PULse:SLEWRate:DELTATime
Sets or returns the time component of the slew rate value. The oscilloscope uses
the delta time value and the threshold voltage values to calculate the target slew
rate ((high threshold voltage -- low threshold voltage) ÷ delta time).
Trigger
TRIGger:A:PULse:SLEWRate:DELTATime <NR3>
TRIGger:A:PULse:SLEWRate:DELTATime?
<NR3> is a floating point value with exponent that sets the time component of the
slew rate value. The argument has a range of 39.6E--9 (39.6 ns) to 10.0E0 (10 s),
in increments of 13.2 ns. Values that are not an increment of 13.2 ns are rounded
to the nearest correct value.
TRIGGER:A:PULSE:SLEWRATE:DELTATIME?
might return TRIGGER:A:PULSE:SLEWRATE:DELTATIME 0.0000011880
TRIGger:A:PULse:SLEWRate:POLarity
Sets or returns the slew rate logic trigger signal polarity value.
Positive
slew rate
Negative
slew rate
Trigger
TRIGger:A:PULse:SLEWRate:POLarity { EITher | POSITIVe |
NEGAtive }
TRIGger:A:PULse:SLEWRate:POLarity?
EITher sets the oscilloscope to trigger on either POSITIVe or NEGAtive polarity
slew rate signals.
POSITIVe sets the oscilloscope to trigger only on positive-polarity slew rate
signals.
Group
Syntax
Arguments
Examples
Group
Syntax
Arguments