Specifications

Command Descriptions
2- 308
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
UNLock (Set Only)
Unlocks the front panel. This command is equivalent to LOCk NONe.
NOTE. If the oscilloscope is in the Remote With Lockout State (RWLS), the
UNLOCk command has no effect. For more information see the ANSI-IEEE Std.
488.1-1987 Standard Digital Interface for Programmable Instrumentation,
section 2.8.3 on RL State Descriptions.
Miscellaneous
UNLock ALL
ALL specifies all front-panel buttons and knobs.
LOCk
VERBose
Sets and queries the Verbose State that controls the length of keywords on query
responses. Keywords can be both headers and arguments. This command does
not affect IEEE Std 488.2-1987 Common Commands (those starting with an
asterisk).
Miscellaneous
VERBose { OFF | ON | <NR1> }
VERBose?
ON or <NR1> ¸ 0 sets the Verbose State true, which returns full-length keywords
for applicable setting queries.
OFF or <NR1> = 0 sets the Verbose State false, which returns minimum-length
keywords for applicable setting queries.
Group
Syntax
Arguments
Related Commands
Group
Syntax
Arguments