Specifications

Command Descriptions
2- 316
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
WFMPre:B YT_Nr
Sets or queries the data width for the waveform to be transferred. This command
is equivalent to DATa:WIDth. Changing WFMPre:BYT_Nr also changes
WFMPre:BIT_Nr and DATa:WIDth.
Waveform
WFMPre:BYT_Nr <NR1>
WFMPre:BYT_Nr?
<NR1> is an integer in the range of 1 to 2 that sets the number of bytes per point.
WFMPRE:BYT_NR 2
specifies that there are 2 bytes per waveform data point.
DATa:WIDth, WFMPre:BIT_Nr
WFMPre:B YT_Or
Sets or queries which byte of binary waveform data is transmitted first during a
waveform data transfer when DATa:WIDth or WFMPre:BYT_Nr is set to 2, or
WFMPre:BIT_Nr is set to 16. Changing WFMPre:BYT_Or changes
DATa:ENCdg (if DATa:ENCdg is not ASCIi). This specification only has
meaningwhenWFMPre:ENCdgisBIN.
Waveform
WFMPre:BYT_Or { LSB | MSB }
WFMPre:BYT_Or?
LSB selects the least significant byte to be transmitted first.
MSB selects the most significant bye to be transmitted first.
Group
Syntax
Arguments
Examples
Related Commands
Group
Syntax
Arguments