Specifications

Command Descriptions
2- 318
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
WFMPre:NR_Pt
The set form of this command sets the record length of the reference waveform
specified by DATA:DESTination. Allowable record lengths are 500 and 10000.
The query form of this command returns the number of points that will be
returned by the next CURVe query. The number of points is the greater of the
absolute value of (DATa:STOP -- DATA:STARt) +1, or the record length of the
source waveform specified by DATA:SOUrce. If the source waveform is not on
or displayed, the query generates an error and returns event code 2244.
Waveform
WFMPre:NR_Pt { 500 | 10000 }
WFMPre:NR_Pt?
WFMPre:NR_Pt?
returns the number of waveform points in the next CURVE query.
DATa:ENCdg, WFMPre:BYT_Or, WFMPre:BN_Fmt
WFMPre:PT_Fmt
The set form of this command sets the format (Y or ENV) of the reference
waveform as specified by the DATa:DESTination command.
The query form returns the format of the waveform specified by the
DATa:SOUrce command, if that waveform is on or displayed. If the waveform is
not displayed, the query form of this command generates an error and returns
event code 2244.
Waveform
WFMPre:PT_Fmt { ENV|Y}
WFMPre:PT_Fmt?
Group
Syntax
Examples
Related Commands
Group
Syntax