Specifications

TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
D-1
Appendix D: Factory Initialization Settings
The factory initialization settings provide you a known state for the oscilloscope.
Factory initialization sets values as shown in Table D--1.
Table D- 1: Factory initialization settings
Control Changed by Factory Init to
Acquire horizontal resolution Normal (10,000 points)
Acquire mode Sample
Acquire number of averages 16
Acquire number of envelopes 16
Acquire run/stop Run
Acquire single sequence Off
Channel selection Channel 1 on, all others off
Coarse No change
Confirm delete No change
Cursor function Off
Cursor H Bar 1 position 10% of graticule height
(--3.2 divisions f rom the center)
Cursor H Bar 2 position 90% of graticule height
(+3.2 divisions from the center)
Cursor V Bar 1 position 10% of record length
Cursor V Bar 2 position 90% of record length
Cursor V Bar units Seconds
Display graticule type Full
Display backlight High
Display color palette Normal
Display persist time Min
Display style dots only Off
Display intensity waveform 30
Dual waveform math function Ch 1 + Ch 2
Edge trigger coupling DC
Edge trigger level 0.0 V
Edge trigger slope Rising