Specifications

Command Groups
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2-19
Hard Copy Commands
Hard copy commands let you control the format of hard copy output and the
initiation and termination of hard copies. Table 2--12 lists these commands.
Table 2- 12: Hard copy commands
Header Description
HARDCopy Start or terminate hard copy
HARDCopy:COMPRESSion Enables/disables hard copy data compression
HARDCopy:FILEName Selects file to which to write hard copy
HARDCopy:FORMat Hard copy output format
HARDCopy:INKSaver Sets oscilloscope to print reduced ink usage
hard copy
HARDCopy:LAYout Hard copy orientation
HARDCopy:PALEtte Select palette to use when making hard copy
HARDCopy:PORT Selects hard copy port
HARDCopy:PREVIEW Displays how the colors will appear
Horizontal Commands
Horizontal commands control the time base of the oscilloscope. You can set the
parameters that let you define the time or horizontal axis attributes of a wave-
form record. Table 2--13 lists these commands.
You may substitute SECdiv for SCAle in the horizontal commands. This
provides program compatibility with earlier models of Tektronix oscilloscopes.
Table 2- 13: Horizontal commands
Header Description
HORizontal? Return horizontal settings
HORizontal:DELay:STATe Delay the acquisition relative to the trigger
event
HORizontal:DELay:TIMe Sets the delay time in seconds
HORizontal:MAIn:SCAle Main time base time per division
HORizontal:MAIn:SECdiv Same as HORizontal:MAIn:SCAle
HORizontal:RECOrdlength Values are 500 or 10000
HORizontal:RESOlution Sets acquisition resolution to normal or fast
trigger