Specifications

Command Groups
2-42
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
Table 2- 28: Waveform commands
Header Description
CURVe Transfers waveform data to or from the
oscilloscope
DATa Sets or returns the format and location of the
waveform data that is transferred with the
CURVe command
DATa:DESTination Sets or returns the destination for waveforms
sent to oscilloscope
DATa:ENCdg Sets or returns the waveform data encoding
method
DATa:SOUrce Sets or returns the source of CURVe? data
DATa:STARt Sets or returns the starting point in waveform
transfer
DATa:STOP Sets or returns the ending point in waveform
transfer
DATa:TARget Same as DATa:DESTination
DATa:WIDth Sets or returns the byte width of waveform
points
REF<x>:DATE? Query waveform save date
REF<x>:HORizontal:POSition<NR3> Sets or returns the horizontal waveform zoom
position
REF<x>:HORizontal:SCAle<NR3> Sets or returns the horizontal waveform zoom
scale
REF<x>:LABel (TDS3AAM) Sets or returns the user-defined reference
waveform label
REF<x>:TIMe? Query waveform save time
REF<x>:VERTical:POSition<NR3> Sets or returns the vert ical waveform position
REF<x>:VERTical:SCAle<NR3> Sets or returns the vertical wavef orm scale
WAVFrm? Query waveform preamble and data
WFMPre? Query waveform preamble
WFMPre:BIT_Nr Sets or returns the preamble bit width of
waveform points
WFMPre:BN_Fmt Sets or returns the preamble binary encodi ng
type
WFMPre:BYT_Nr Sets or returns the preamble byte width of
waveform points
WFMPre:BYT_Or Sets or returns the preamble byte order of
waveform points
WFMPre:ENCdg Sets or returns the preamble encoding method