Operation Manual

106
Troubleshooting
If Memory Becomes Full during
Scanning
The number of pages that can be stored in the machine’s memory is as follows: The memory available for image data
diers, depending on the model of your machine.
imageRUNNER ADVANCE
C2030i/C2025i/C2020i
imageRUNNER ADVANCE
C2030L/C2020L
Memory for Each
Function
Shared Memory Memory for Each
Function
Shared Memory
Function Copy Approx. 100 pages Approx. 200 pages
Printing from
Computer
Approx. 100
pages
*1
Approx. 1,000
pages
Fax (Receive) Approx. 6,000 pages Approx. 5,000 pages
Scan and Send
Fax/I-Fax Inbox
*1 Excludes Secured Print jobs
For example, if you are using the imageRUNNER ADVANCE C2030i/C2025i/C2020i, the Copy function can store up to 6,100
pages of scanned images. 100 + 6,000 = 6,100 pages (approximate gures)
However, the number of pages that the machine's memory can store may dier, depending on the amount of memory
required for les stored in the Fax/I-Fax Inbox, and jobs that are in the print queue.
If memory becomes full during the scanning of originals, the following message will appear on the touch panel display:
When using the Fax/Scan and Store functions, you can send up to 999 pages at one time.
If you are using the imageRUNNER ADVANCE C2030L/C2020L, you may not be able to send 999 pages at one time, even
if you reduce the data for each page. In this case, divide the document into two or more parts, and then try sending the
document again.
Delete any unnecessary les in the Fax/I-Fax Inbox to free up memory.
For the Copy Functions
1
1
Follow the directions below based on the message that appears on the touch
panel display.
If the message <Scanning will be stopped because the memory is full. Do you want to print
the scanned pages?> appears:
Select [Yes] or [No].
●
[Yes]:
[No]:
The pages scanned into memory are printed. When printing is complete, scan the remaining
originals.
The pages scanned into memory are not printed.
If the message <Scanning will be stopped because the memory is full.> appears:
Select [OK].
●
[OK]: Returns to the Basic Features screen of the function you are using. Scan the job again when the
current job is complete.
•
•
•