Operation Manual
119
To set:
1. Press [Scan and Send] or [Fax] → [Options].
2. Press [Finished Stamp]
→ [Close].
●
After the original is sent, you can also send a job done notice to the specied e-mail address (Job Done Notice). For more information, see
p. 146 in this manual.
Q5
Can a mark be applied to the document that has been scanned?
A
The machine can print a stamp on the scanned document by using the Stamp mode.
The Stamp mode can only be used with the Fax or Scan and Send function.
Vertical Placement Horizontal Placement
Position at which
stamp is applied
Position at which
stamp is applied
*