Operation Manual

139
Q25
The edges are not copied when I perform enlargement/reduction.
A
Check the orientation of the paper or set to automatically rotate the paper to ensure it is copied correctly. Perform the following operation.
Check the Orientation of the Original:
Check whether the orientation of the original in the feeder or on the platen glass matches the orientation of the paper loaded in the
paper drawer.
Setting Automatic Rotation:
1. Press .
2. Press [Function Settings]
→ [Copy] → [Auto Orientation].
3. Select [On]
→ [OK].
●
●
Q26
Can I print on the reverse side of the preprinted paper?
A
You can use [2nd Side of 2-Sided Page] for the Multi-Purpose Tray to print on paper already
printed on.
To set:
1. Load the paper in the multi-purpose tray with the side to print on face down.
2. Select the paper size
→ press [Next].
3. Select the paper type
→ press [2nd Side of 2-Sided Page] → [OK].
4. Press
.
●
A paper jam is more likely to occur with paper already printed on compared to new paper.