Operation Manual

63
4
4
Adjust the front guide.
1
2
3
1
3
1. Loosen the two screws xing the
front width guide of the envelope
feeder attachment.
2. Press down on the envelope
receptacle, and move the front
width guide to align it with the mark
for the desired envelope size.
3. Fix the front width guide in place
with the screws.
5
5
Adjust the rear width guide in the same way as in step 4.
1
3
1
3
2
6
6
Load the envelopes.
1
1
2
1. Load 10 envelopes at a time with
the side you want to print on facing
up. While loading the envelopes,
press down on the left side of the
receptacle to lock them into place.
2. Align the leading edges of the
envelopes, and make sure that they
are held in place under the claws.