Operation Manual

66
Routine Maintenance
2
2
Load the stamp cartridge.
1
2
1. Remove the old stamp cartridge,
using tweezers.
2. Push in the new stamp cartridge
until it clicks, using tweezers.
Make sure that the stamp cartridge is not protruding from the surface.
Insert the stamp cartridge properly, or paper jams may occur.
•
•
3
3
Close the covers.
2
1
1. Close the inner cover.
2. Close the feeder cover.
When closing the covers, be careful not to get your ngers caught, as this may result in personal
injury.