Operation Manual
68
Routine Maintenance
3
3
Insert a new staple cartridge into the staple case.
2
1
3
1. Insert the new staple cartridge.
2. Press the spring-loaded case down
until it clicks into place.
3. Remove the seal holding the staples
together, by pulling it straight out.
Use only staple cartridges intended for use with this machine.
Do not remove the seal that holds the staples together before you place the staple cartridge into the
staple case.
Only one staple cartridge can be inserted at a time.
Make sure that you pull the seal straight out. If you pull it out at an angle, it may tear.
•
•
•
•
4
4
Insert the staple case into the nisher.
1. Gently push the staple case back into the nisher, and push down rmly until it is securely in
place.
2. Close the front cover of the nisher.
After the cover is closed, the stapler unit may automatically perform a “dry” stapling operation to reposition
the staples.
When closing the covers, be careful not to get your ngers caught, as this may result in personal
injury.
Inner Finisher-C1 (Optional)(Last Page)