Installation Instructions

68
Using the System Options/MEAP Applications
3
Using the Remote UI to
Update (Delivery)
You can update the firmware of the machine from the
Remote UI.
To perform the procedures described in this section, you must
log in to the machine as an administrator. (See “Logging In
Using the Remote UI, on p. 8.)
Checking the New Firmware/Specifying the
Delivery Settings
You can check the new firmware that is applicable with the
machine and specify the delivery settings.
1
From the top page of the Remote UI, click
[Settings/Registration] [License/Others]
[Register/Update Software].
2
Click [Delivered Update].
3
Click [Confirm New Firmware].
Contact the delivery server for information on whether an
applicable new firmware is available or not.
If an applicable firmware is not available, an error message is
displayed.
4
Verify the displayed information specify
necessary settings click [Execute].
Details of each item are shown below.
Firmware:
Current Version: Displays the version of the current
firmware.
Applicable Firmware: Displays the new firmware that is
applicable with the machine.
Release Note: If the new firmware has a release note, that
information is displayed.
Delivery Settings:
Delivery Schedule: Click "Deliver now" or " Deliver at
specified date and time."
[Deliver now]: Downloads the firmware after the delivery
setting is specified.
[Deliver at specified date and time]: Select the date/time
(year, month, date, and time) to download the firmware
from the drop-down list.
Timing to Apply: Click [Auto] or [Manual].
[Auto]: The firmware is automatically applied after the
download of the firmware is completed.
[Manual]: Only downloads the firmware. To apply the
downloaded firmware, set from [Apply Firmware].
Deliver Update: Click [On] or [Off ].
[On]: Downloads only the difference between the current
firmware and the new firmware.
[Off ]: Downloads the new firmware entirely.
E-Mail Address: Enter the e-mail address of the
administrator. You can receive e-mails regarding the update
status that is sent from the delivery server.
Comments: Enter the comment that will automatically be
added to the e-mail. If the model name is entered, you can
identify which device status the e-mail is about.
You can specify a date/time up to 30 days later for delivery
schedule.
You can enter up to 64 characters for the e-mail address
(excluding "(," ")," "<," ">," ",," ";," ":," "”," and "\").
You can enter up to 128 characters in Comment.