Operation Manual
122
Frequently Asked Questions
Specifying the File Server on the Touch Panel Display:
Specifying the File Server by Host Search:
1. Press [Scan and Send] → [New Destination] → [File].
2. Press the protocol drop-down list
→ [Windows (SMB)] → [Search Host].
3. Enter the IP address of the computer to use as the le server in [Host Name]
→
press [Start Searching].
4. Specify the le server
→ press [OK].
●
●
Specifying the File Server by Browsing:
1. Press [Scan and Send] → [New Destination] → [File].
2. Press the protocol drop-down list
→ [Windows (SMB)] → [Browse].
3. Specify the le server
→ [OK].
●
You can use the following procedure to check the IP address of your computer.
The procedures may dier, depending on the type of operating system you are using.
1. On the [Start] menu, click [Run] → enter ‘cmd’.
2. Click [OK] → enter ‘ipcong’ → press [ENTER] on the keyboard.
*