Operation Manual
64
Routine Maintenance
7
7
Load the envelopes as shown below.
Front
Envelopes which have been rolled or curled must be straightened out prior to use.
Make sure that the height of the envelope stack does not exceed the height limit mark ( ).
The maximum height (quantity) of envelopes that can be loaded into the cassette is approximately 30
mm.
The maximum height (quantity) of envelopes varies, depending on the envelope type and user operating
conditions, but as a reference, 30 mm is approximately 50 envelopes.
For details on how to change the registered envelope information for the drawer, see e-Manual > Settings/
Registration.
•
•
•
•
8
8
Insert the drawer.
1. Gently push the paper drawer back into the machine until it clicks into place in the closed
position.
2. Check the paper size dial, andthen register the envelope size in Settings/Registration.
For details on how to register envelope sizes, see e-Manual > Settings/Registration.
Never place paper or any other items in the empty part of the paper drawer next to the envelopes. Doing so
may cause paper jams.
If output has been stopped due to an insucient number of envelopes, load more envelopes, and follow
the instructions on the touch panel display. Printing resumes.
When returning the paper drawer to its original position, be careful not to get your ngers
caught, as this may result in personal injury.