Operation Manual

86
Troubleshooting
When an Optional Tray or Finisher Is Attached
If the optional Inner 2 Way Tray-F1, Copy Tray-J1, or Inner Finisher-C1 is attached, follow the instructions below to remove
any jammed paper.
If paper is loaded in the multi-purpose tray, make sure to remove any paper from the multi-purpose tray rst.
1
1
Open the paper drawer's upper right cover and lower right cover → check for
paper jams.
2
1
1. Open the paper drawer’s lower right
cover.
2. Open the paper drawer’s upper right
cover.
If there is any jammed paper, remove it
→ close the covers.
Gently close the upper right cover and lower right cover until they click into place in the closed positions.
2
2
Remove any jammed paper inside the lower right cover and upper right cover of
the main unit.
1
2
3
1. Grip the handle, and open the lower
right cover of the main unit.
2. Grip the green handle, and open the
upper right cover of the main unit.
3. Remove any jammed paper inside
the lower right cover of the main
unit.
When closing the covers, be careful not to get your ngers caught, as this may result in personal
injury.