Installation Instructions

9
Operations Required to Use the Machine
1
To log in as the administrator using the Remote UI, you must
specify the network connection settings in advance. For
instructions on specifying the network connection settings,
see “Connecting the Machine to a Network,” on p. 9.
If you are using a login service, see e-Manual > MEAP.
If the authentication function is not set, the Log In screen is
not displayed.
For information on necessary system environment and
preparation to start the Remote UI, see e-Manual > Remote UI.
In this example, the default System Manager ID and System
PIN are used to log in.
1
Start your Web browser.
2
Enter 'http://<IP address or host name of the
machine>' in [Address].
3
Enter the System Manager ID and System PIN →
click [Administrator Login].
[System Manager ID]: 7654321
[System PIN]: 7654321
You are now logged in to the machine as an administrator.
Refer to Chapter 2, "Setting Up the Machine for the First Time,"
to specify the settings for using each function.
When you have finished specifying settings and performing
operations, press [Log Out] to log out.
•
•
•
•
Connecting the Machine
to a Network
To use functions such as the Print or Fax function
from a computer, it is necessary to connect the
machine to a network in advance.
Before setting the network connection, it is necessary to
connect the machine and the computer with a network
cable. For details, see e-Manual > Network > Connecting the
Machine to a Computer or Network.
1
Press .
2
Press [Preferences].
3
Press [Network].