Installation Instructions

56
Using the System Options/MEAP Applications
3
Using the Remote UI to
Install (Delivery)
You can install the system options or MEAP applications to
the machine using the Remote UI.
To perform the procedures described in this section, you must
log in to the machine as an administrator. (See “Logging In
Using the Remote UI,” on p. 8.)
1
From the top page of the Remote UI, click
[Settings/Registration] → [License/Others] →
[Register/Update Software].
2
Click [Delivered Installation].
3
Enter the license access number → click [Next].
Once the license access number is confirmed after contacting
the delivery server, information for the system options/MEAP
applications you can install are displayed.
If the license access number is incorrect, an error page is
displayed.
4
Select the system options and MEAP applications
→ click [Start Installation].
Status after Installation:
Start: Starts the installed MEAP applications.
Stop: Stops the installed MEAP applications.
If [Stop] is selected when installing MEAP applications, you
must start the application before using the MEAP application.
(See “Starting the MEAP Applications,” on p. 59.)
If the agreement screen is displayed, read the agreement. If
you abide with the agreement, click [Accept].
5
Check the Installation Result screen.
When the installation of the system options is completed, the
message <Restart the device.> appears. Restart the machine
to enable the function.
To return to the Delivered Installation screen, click [To
Delivered Installation].
You can download the manual for the installed system
options/MEAP applications by accessing the URL for the
manual download site displayed on the Installation Result
screen. (See “Downloading the Manuals and Related Software,”
on p. 60.)