Operation Manual
56
Routine Maintenance
Adjusting a Paper Drawer to Hold a Dierent Paper Size
When loading paper of a dierent size into a paper drawer, follow the procedure below to adjust the paper drawer guides.
1
1
Remove the paper.
3
2
1
1. Press and release the button on the
paper drawer in which you want to
adjust.
2. Grip the handle, and pull out the
paper drawer until it stops.
3. Remove all of the remaining paper.
2
2
Adjust the position of the paper drawer guides.
1
2
2
1. Slide the left guide while squeezing
it on the top to align it with the mark
for the desired paper size.
2. Slide the front guide while
squeezing it on the top to align it
with the mark for the desired paper
size.
Slide the guides until they click into place. If the left guide and front guide are not aligned correctly, the
paper size will not appear on the touch panel display correctly. It is also necessary to adjust the guides
correctly to avoid causing a paper jam, dirty prints, or making the inside of the machine dirty.
When loading paper, take care not to cut your hands on the edges of the paper.