Operation Manual

62
Routine Maintenance
Loading the Envelope after Specifying the Size
This section explains how to load the envelopes that are specied in Settings/Registration into the envelope cassette.
Make sure that you change the envelope settings from the Settings/Registration screen before carrying out the following
procedure. (See e-Manual > Settings/Registration.) Otherwise, the machine may not recognize the changes you have made.
1
1
Open the drawer.
1
2
1. Press and release the button on
Paper Drawer 2.
2. Grip the handle, and pull out the
paper drawer until it stops.
2
2
Remove the drawer and envelopes.
1
2
1. Pull and lift the paper drawer out of
the machine by holding its left and
right sides with both hands.
2. Remove the envelopes that are
loaded in the paper drawer (several
envelopes at a time).
3
3
Slide the left guide to align it with the mark for the desired envelope size.