Operation Manual

67
Inner Finisher-C1
This section describes the procedure for replacing the staple cartridge in the Inner Finisher-C1.
The Inner Finisher-C1 is an optional product.
We recommend that you order staple cartridges from your local authorized Canon dealer before your stock runs out.
Replacing the Staple Cartridge
1
1
Pull out the staple case from the nisher.
2
1
1. Open the front cover of the nisher.
2. Lift and pull out the staple case from
the stapler unit, holding it by the
green tab.
2
2
Pull out the staple cartridge from the staple case.
PUSH
2
1
1
1. Press the areas indicated by PUSH
on both sides of the staple case.
2. Once you have released the spring-
loaded case, pull out the staple
cartridge.
•
•