Manual

8-8 Receiving Faxes Chapter 8
Receiving Faxes Manually: MANUAL MODE
In MANUAL MODE, if you connect the optional handset, a telephone, or an extension phone to
your unit, you can receive voice calls as well as manually activate reception of faxes. You can
activate reception from your unit or from the telephone or extension phone connected to the
unit (this is called
Remote receiving ).
n
• For this mode, you need to connect the optional handset, a telephone, or an extension phone to
your unit. (→ p. 2-6)
• Make sure the REMOTE RX setting is enabled (→ p. 14-7). For MultiPASS models, you can also
enable this setting from the MultiPASS Suite. (→
Software User’s Guide )
Setting MANUAL MODE
Follow this procedure to set the receive mode to MANUAL MODE:
1 Press Receive Mode to select MANUAL
MODE.
• After a few seconds, the LCD changes to this
display:
Receiving a Fax Manually
Follow this procedure to receive a fax manually:
1 Make sure Manual is displayed in the LCD.
(→ above)
2 Make sure you have connected the optional
handset, a telephone, or an extension phone
to the unit. (→ p. 2-6)
3 When you hear the optional handset,
telephone, or extension phone ring, pick up
the handset.
Ex:
Ex:
MANUAL MODE
15:00 Manual
15:00 Manual