Manual

Chapter 14 Summary of Settings 14-7
Summary of
Settings
RX (Reception) Settings Menu
For details on accessing the settings below, → pp. 14-2, 14-3.
Setting Description Sub-Settings
ECM RX
Enables/disables Error Correction Mode (ECM)
during reception.
ON
OFF
RX MODE
Selects the receive mode. (
→
Chapter 8)
If you select FAX/TEL AUTO SW, you can select
additional sub-settings. (
→
p. 8-6)
FAX ONLY MODE
FAX/TEL AUTO SW
INCOMING RING
When the unit is set to
FAX ONLY MODE
or
FAX/TEL AUTO SW, enables/disables ringing
when it receives a call.*
OFF
ON
RING COUNT**
Selects the number of incoming rings before the
unit begins receiving.
2 TIMES
(
1
to
99
)
MAN/AUTO SWITCH
When the unit is set to MANUAL MODE,
determines if the unit switches to fax receive mode
after it rings for a specified time.
OFF
ON
F/T RING TIME
**
If you select
ON
above, selects the length of time
the unit rings before switching to fax receive mode.
15 SEC
(1 to 99)
REMOTE RX
Enables/disables remote receiving.
ON
OFF
REMOTE RX ID**
If you select ON above, selects the remote
receiving ID.
25
(00 to 99)
MEMORY RX
Enables/disables memory reception of a document
(e.g. when an error occurs).
ON
OFF
COLOUR RX
(COLOR RX)
Enables/disables colour fax reception. (
→
p. 8-12)
ON
OFF
(Default settings are shown in bold type.)
* Even if you have set INCOMING RING to ON, ringing will only occur if you have connected the optional
handset, a telephone, or an extension phone to your unit.
** This setting is available in all models, but the setting names only appear in the MultiPASS C75/FAX-
B215C.